If you need the latest available firmware for your Ensto Chago charger, find it below.
Note: In case the charger is connected to any back-end, before updating please check with the back-end operator what is the latest approved firmware version that can be used with their back-end.
Gen 1 charger Version | Debian package | Notes | Gen 2 version (charger with new controller) Debian package |
---|---|---|---|
5.33.3-20644 |
| ||
5.33.1-20092 | If the controller does not start up after the update, it will need a reboot. This means that the reboot must be done on site manually. | ||
5.32.0-18892 | Common improvements. Postponed. | ||
5.29.4-13558 | Replaces 5.29.3fw which had one update related bug. | ||
Fixes connectivity issues. | |||
IMPORTANT! Healthy reboot parameter must be set to 20 or less for this firmware version. OCCP Parameter name: DaysScheduledReboots = 20 New webUI, MiFARE Desfire EV2-J secure RFID, new Building Automation Energy Management protocols, local charging scheduler, Autocharge, over and under voltage monitor . | |||
4.66-6074 | firmware_4.66-6074.deb | OCPP JSON re-connection fix, OCPP Master/Slave memory segmentation fault fix, OCPP 1.6 JSON Basic Auth, RFID learning mode. | |
EV-Wakeup improvements, IT-Network DLM improvements. | |||
Wake-up / Polling for DLM | |||
4.53-5444 | DLM bug fixes and several other fixes. | ||
4.21-3390 | Some bug fixes for the DLM. | ||
Obsolete not actively supported anymore | |||
Obsolete not actively supported anymore | |||
Obsolete not actively supported anymore |
Related articles