If you need the latest available firmware for your Ensto Chago charger, find it below.
You can use USB stick based method (see Update firmware with USB stick) or OCPP FirmwareUpdate request to update the software. You can only go to a newer version, not back to an older version, this is by design. |
Note: In case the charger is connected to any back-end, before updating please check with the back-end operator what is the latest approved firmware version that can be used with their back-end. |
Gen 1 charger Version | Debian package | Notes | Gen 2 version (charger with new controller) Debian package |
---|---|---|---|
5.32.0-18892 | Common improvements. Postponed. | ||
5.29.4-13558 | Replaces 5.29.3fw which had one update related bug. | ||
Fixes connectivity issues. | |||
IMPORTANT! Healthy reboot parameter must be set to 20 or less for this firmware version. OCCP Parameter name: DaysScheduledReboots = 20 New webUI, MiFARE Desfire EV2-J secure RFID, new Building Automation Energy Management protocols, local charging scheduler, Autocharge, over and under voltage monitor . | |||
4.66-6074 | firmware_4.66-6074.deb | OCPP JSON re-connection fix, OCPP Master/Slave memory segmentation fault fix, OCPP 1.6 JSON Basic Auth, RFID learning mode. | |
EV-Wakeup improvements, IT-Network DLM improvements. | |||
Wake-up / Polling for DLM | |||
4.53-5444 | DLM bug fixes and several other fixes. | ||
4.21-3390 | Some bug fixes for the DLM. | ||
Obsolete not actively supported anymore | |||
Obsolete not actively supported anymore | |||
Obsolete not actively supported anymore |
Related articles appear here based on the labels you select. Click to edit the macro and add or change labels.
|