Page History

...

Connect your service laptop to charger by 
using micro-USB (Generation 1) or USB-B (Generation 2)

Step-by-step guide for Generation 1 controller

1. Take Micro-USB cable and connect the USB-A connector to your Windows 7 or 10 laptop and the Micro-USB connector to Slave (right hand side) controller.

2. NOTE! A single-plug charger has only one controller, which is the Master controller. You can connect to this with the instructions of the Slave controller.

   
   
3. If required, install the RNDIS driver for Windows
4. Open web browser (for example Chrome or FireFox)
5. Load the below web pages depending which controller's state page you want to see
   
   1. If you need to access the Master controller, open page: http://192.168.123.123:81/state
   2. If you need to access the Slave controller, open page: http://192.168.123.123/state
6. Load the below web pages depending which controller's Operator page you want to see
   1. If you need to access the Master controller's Operator page, open page: http://192.168.123.123:81/operator/operator
   2. If you need to access the Slave controller's Operator page, open page: http://192.168.123.123/operator/operator
7. If the web page asks for login credentials, please provide the login credentials

...

1. You will need to change the IP-address of your laptop to static address.
2. For example: (IP-address: 192.168.124.120), (Subnet mask: 255.255.255.0), (Gateway: 192.168.124.1).
3. Open web browser (for example Chrome or FireFox).
4. Open state page: http://192.168.124.123
5. Or open operator page: http://192.168.124.123/operator/operator
6. If the web page asks for login credentials, please provide the login credentials.

Step-by-step guide for Generation 2 controller

1. Connect the USB-A connector to your laptop and the USB-B connector to Slave (right hand side) controller.
2. Open web browser (for example Chrome or FireFox)
3. Load the below web page. Both master and slave side are visible in the same page: http://192.168.123.123
4. If the web page asks for login credentials, please provide the login credentials.

Image Added

Related articles

...