• Created by Unknown User (timo), last modified on Dec 01, 2017

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 7 Next »

When the state page of the charger needs to be checked, or the configuration parameters changed, please follow the steps below.

The Micro-USB cable used in this topic must be a USB data cable and not charge-only Micro-USB cable.


Step-by-step guide

  1. Take Micro-USB cable and connect the USB-A connector to your Windows 7 or 10 laptop and the Micro-USB connector to Slave (right hand side) controller

  2. If required, install the RNDIS driver for Windows
  3. Open web browser (for example Chrome or FireFox)
  4. Load the below web pages depending which controller's state page you want to see
    1. If you need to access the Master controller, open page: http://192.168.123.123:81/state
    2. If you need to access the Slave controller, open page: http://192.168.123.123/state
  5. Load the below web pages depending which controller's Operator page you want to see
    1. If you need to access the Master controller's Operator page, open page: http://192.168.123.123:81/operator/operator
    2. If you need to access the Slave controller's Operator page, open page: http://192.168.123.123/operator/operator
  6. If the web page asks for login credentials, please provide the login credentials



Content by label

There is no content with the specified labels

  • No labels