1. Close the hatch if it is open.
2. Open the service door.
3. Switch the QF1 off. Switch off the reclosing motor M1 too if it has one.
4. EVC's red indicator LED will turn on.
5. Show 5 times an RFID tag to the EVD card reader.
6. Switch the QF1 on. Switch the reclosing motor M1 on if it has one.
7. EVC's green indicator LED light will turn on.
8. Show once the same tag as above to the EVC card reader.
9. EVC's red indicator LED will turn on for a few seconds.
10. EVC's card memory is now cleared. Do reboot of the charger.
11. Now charger will work with any RFID card.