If static IP configuration needs to be configured to the charger, see below steps.

Step-by-step guide by using a USB stick

Add the steps involved:

1. Download and extract the below zip file so that you have directory called sw_config and the below mentioned files inside it
   
2. Download and install a text editor capable of handling UNIX file format End Of Line character, like Notepad++
3. Open the file called NetworkConfigStaticAddress_tcpip with the text editor capable of handling UNIX file format and replace the first line with the correct static IP address
4. Save the file in UNIX file format
5. Open the file called NetworkConfigStaticDNS_tcpip with the text editor capable of handling UNIX file format and replace the first line with the correct DNS address
6. Save the file in UNIX file format
7. Open the file called NetworkConfigStaticGateway_tcpip with the text editor capable of handling UNIX file format and replace the first line with the correct GATEWAY address
8. Save the file in UNIX file format
9. Open the file called NetworkConfigStaticNetmask_tcpip with the text editor capable of handling UNIX file format and replace the first line with the correct NETMASK
10. Save the file in UNIX file format
11. Create compatible USB stick
12. Copy the sw_config directory with all the above files in it to the root of the USB memory stick
13. Finally Deploy operator configuration to charger with USB stick (on double sided models like EVB200, EVF200, EVC200, only deploy the configuration to the left hand side master charge controller)

Related articles

Related articles appear here based on the labels you select. Click to edit the macro and add or change labels.